1.Lifeboat and Launching Appliance Servicing and Testing

Inspection, maintenance, repair, testing and certification of:

• Lifeboats
• Rescue boats
• Free-fall lifeboats
• Davits
• Winches
• Launching appliances
• On-load and off-load release systems
• Release hooks and control cables
• Hydraulic and mechanical components

Services may include annual inspections, five-yearly examinations, operational testing, load testing and release gear testing in accordance with applicable maker, Flag State, Class, SOLAS and IMO requirements.

2.Firefighting System Inspections

Inspection, servicing, testing and certification of fixed marine firefighting systems, including:

• High-pressure and low-pressure CO₂ systems
• Fixed foam systems
• Dry powder systems
• Water mist systems
• Local application systems
• Galley fire suppression systems
• Fire detection and alarm systems
• Smoke detection systems
• Control valves, release stations and pilot cylinders

Services may include annual, two-yearly and five-yearly inspections, functional testing, cylinder level checks, manual weighing, valve inspection and system activation testing.

3.Fire Extinguisher Inspection and Servicing

Inspection, maintenance, refilling, pressure testing and certification of:

• Portable fire extinguishers
• Wheeled fire extinguishers
• Foam extinguishers
• Powder extinguishers
• CO₂ extinguishers
• Water extinguishers
• Wet chemical extinguishers
• Extinguisher cartridges
• Foam applicators

Services may include visual inspection, weighing, pressure checks, hose and nozzle inspection, replacement of seals, refilling, hydrostatic testing and renewal of defective components.

4.Foam Concentrate and Dry Powder Analysis

Laboratory analysis and onboard testing of marine firefighting media, including:

• Low-expansion foam
• High-expansion foam
• Alcohol-resistant foam
• Foam concentrate condition testing
• Foam proportioner testing
• Foam mixing ratio verification
• Small-scale fire testing
• Dry powder moisture analysis
• Contamination and degradation checks
• PFAS and PFOS-related documentation review

The purpose is to confirm that the firefighting medium remains suitable, stable and effective.

5.SCBA Inspection and Maintenance

Inspection, servicing and testing of self-contained breathing apparatus used by shipboard firefighting teams.

Services may include:

• Complete set inspection
• Face mask inspection
• Demand valve testing
• Pressure reducer inspection
• Harness and backplate inspection
• Cylinder pressure check
• Cylinder hydrostatic testing
• Cylinder refilling
• Low-pressure alarm testing
• Leakage and functional testing

6.EEBD Inspection and Maintenance

Inspection and servicing of emergency escape breathing devices used for evacuation from smoke-filled or hazardous spaces.

Services may include:

• Visual inspection
• Cylinder pressure verification
• Hood and face-seal inspection
• Hose inspection
• Activation mechanism testing
• Cylinder hydrostatic testing
• Cylinder refilling
• Replacement of expired or damaged parts

7.Calibration of Portable and Fixed Gas Analysing Equipment

Calibration, functional testing and certification of gas detection and gas analysis equipment, including:

• Portable multi-gas detectors
• Personal gas detectors
• Fixed gas detection systems
• Gas detection transmitters
• Gas detection control panels
• Oxygen analysers
• Hydrocarbon gas detectors
• Toxic gas detectors
• Sampling pumps and hoses
• Alarm and sensor testing

Typical gases include oxygen, carbon monoxide, hydrogen sulphide, methane, carbon dioxide and hydrocarbons.

8.ODME Servicing and Calibration

Inspection, servicing, testing and calibration of oil discharge monitoring equipment used on tankers.

Services may include:

• System performance testing
• Oil content monitor calibration
• Flow meter verification
• Sampling system inspection
• Alarm testing
• Automatic stopping device testing
• Sensor cleaning
• System fault diagnosis
• Calibration certificate issuance

9.Oily Water Separator Servicing and Calibration

Inspection, servicing and calibration of oily water separator systems and 15 ppm bilge alarms.

Services may include:

• 15 ppm monitor calibration
• Alarm function testing
• Automatic stopping device testing
• Sampling line inspection
• Cell cleaning
• Sensor replacement
• Flow and valve checks
• Separator performance checks
• System troubleshooting

10.Ultrasonic Oil/Water Interface Tape Calibration

Inspection, testing and calibration of portable interface detectors used to measure oil, water and product levels in tanks.

Services may include:

• Probe testing
• Oil/water interface detection test
• Ullage measurement verification
• Temperature measurement verification
• Tape inspection
• Electrical continuity testing
• Sensor cleaning
• Battery replacement
• Calibration and certification

11.Medical Oxygen Inspection, Refilling and Related Services

Inspection, servicing, pressure testing and refilling of marine medical oxygen equipment.

Services may include:

• Oxygen cylinder inspection
• Cylinder pressure check
• Hydrostatic testing
• Oxygen refilling
• Valve inspection
• Regulator inspection
• Flowmeter inspection
• Mask and hose inspection
• Leak testing
• Replacement of damaged components

12.Inflatable Lifejacket Inspection and Servicing

Inspection, servicing and certification of inflatable lifejackets.

Services may include:

• Inflation test
• Leak test
• Oral inflation valve inspection
• CO₂ cylinder inspection
• Firing head inspection
• Automatic activation device inspection
• Light and whistle inspection
• Webbing, buckle and cover inspection
• Replacement of expired components
• Repacking and certification

13.Immersion Suit and Chemical Protective Suit Inspection

Inspection, testing, repair and certification of marine protective suits.

Services may include:

• Visual inspection
• Seam inspection
• Zipper inspection
• Glove and boot inspection
• Air pressure leak testing
• Watertightness testing
• Repair of minor damage
• Reflective tape inspection
• Light and whistle checks
• Repacking and certification

Chemical suit inspection may also include visor, valve and gastightness testing.

14.Crane Load Testing

Inspection and load testing of shipboard cranes and lifting appliances.

Services may include:

• Visual inspection
• Functional testing
• Static load testing
• Dynamic load testing
• Brake testing
• Limit switch testing
• Wire rope inspection
• Hook and block inspection
• Load test using water bags or certified test weights
• Dynamometer testing
• Certification and reporting

15.Marine Safety Equipment and Spare Parts Supply

Supply and delivery of marine safety equipment, consumables and spare parts, including:

• Lifeboat and davit spare parts
• Release hook components
• Control cables and hydraulic parts
• Fire extinguishers
• Fire hoses and nozzles
• Foam concentrate
• SCBA and EEBD spare parts
• Gas detectors and sensors
• Calibration gases
• Medical oxygen equipment
• Inflatable lifejackets and immersion suits
• Pilot ladders and embarkation ladders
• SOLAS-approved safety equipment